Bromic Gas Mounting Pole
Bromic Gas Mounting Pole
Bromic Gas Mounting Pole

Bromic Gas Mounting Pole

Regular price$368.00
/
Shipping calculated at checkout.

Length
  • Free shipping on most orders over $400*
  • In stock, ready to ship
  • Backordered, shipping soon

Achieve the ideal installation height for your Bromic gas heater with the Bromic Gas Heater Mounting Pole, designed for compatible Platinum Smart-Heat® Gas and Tungsten Smart-Heat® Gas heaters.

Available in multiple lengths to accommodate a variety of ceiling heights, these mounting poles allow compatible Bromic gas heaters to be suspended from overhead structures while maintaining a clean, professional installation.

Bromic recommends positioning the bottom of the heater approximately 8 to 9 feet above the floor for optimal heating performance. Selecting the appropriate mounting pole helps bring the heater down from higher ceilings and beams to achieve the recommended operating height.

The mounting system can also accommodate pitched ceilings. The adjustment at the mounting point allows the pole to remain completely vertical even when attached to an angled ceiling.

Key Features

  • Designed for Bromic Gas Heaters – Compatible with both Platinum and Tungsten Smart-Heat® Gas collections.
  • Multiple Length Options – Available in six sizes to accommodate a variety of ceiling heights.
  • Optimal Heater Positioning – Helps position the bottom of the heater approximately 8–9 ft. above the floor.
  • Ceiling-Mount Installation – Provides a clean solution for suspending compatible gas heaters from overhead structures.
  • Pitched Ceiling Compatible – Mounting-point adjustment helps maintain a vertical pole on suitable pitched ceilings.
  • Architectural Installation – Provides a clean alternative to standard wall mounting.
  • Genuine Bromic Accessory – Purpose-built for compatible Bromic outdoor gas heaters.

Specifications

Brand: Bromic Heating
Product Type: Gas Heater Ceiling Mounting Pole
Installation Type: Ceiling Mount
Available Sizes: Six pole lengths
Recommended Heater Height: 8–9 ft. from floor to bottom of heater
Compatible Collections: Platinum Smart-Heat® Gas / Tungsten Smart-Heat® Gas

Compatibility

Compatible with:

  • Bromic Platinum Smart-Heat® Gas 300 Series
  • Bromic Platinum Smart-Heat® Gas 500 Series
  • Bromic Tungsten Smart-Heat® Gas 300 Series
  • Bromic Tungsten Smart-Heat® Gas 500 Series

Important: These mounting poles are intended for Bromic's built-in Platinum and Tungsten Gas heater collections.

They should not be confused with accessories for the Tungsten Freestanding Gas heater.

Choosing the Correct Pole Length

Bromic recommends positioning the bottom of the heater approximately 8–9 feet above the floor for optimal effective heating height.

When determining the appropriate pole length, account for:

  • Floor-to-ceiling or floor-to-beam height
  • Selected mounting pole length
  • Heater and bracket height
  • Required installation clearances

Bromic lists the combined heater and bracket height as 16.6 inches when calculating the finished mounting height.

Always follow the applicable Bromic installation manual and clearance requirements.

Pitched Ceiling Installation

The mounting system can accommodate suitable pitched ceilings; however, the pole itself must remain completely vertical.

Do not install the pole at an angle. The adjustment at the ceiling mounting point is designed to compensate for the ceiling pitch so the pole can drop vertically.

What's Included

  • Bromic Gas Mounting Pole

Please Note: Heater, controls, gas connections, and other accessories are sold separately unless otherwise stated.

Ideal For

High-ceiling patios, covered outdoor kitchens, restaurants, hotels, hospitality venues, luxury residences, terraces, commercial patios, and other ceiling-mounted Bromic gas heater installations.

Installation Note: Heater and mounting hardware must be installed according to Bromic's installation instructions, required clearances, and applicable building and gas codes.

Free shipping on most orders over $400. Due to our vast selection of product offerings, some products may require additional shipping and handling charges, such as products that need custom crating. Some of these charges would need to be calculated post-purchase. We will always coordinate with you in these special cases.

locally crafted

Handmade in California

You may also like


Recently viewed